NETWORK OPERATIONS TOOLKIT

Turn raw inventory into consistent naming.

Create deployment-ready Extreme and FS switch commands, then clean IPAM records using your approved Frontiir naming patterns.

3naming workflows

2 modeslocal rules + Gemini review

Run local formatting in your browser, then optionally request a secure Gemini review. AI requests go only through this site’s Worker; the API key never reaches your browser.

WORKFLOW

Choose your starting point

Every table remains editable before you export.

01⇄

Extreme Switch

Parse show ports description, review display and description strings, then generate EXOS commands.

02⌁

FS Switch

Convert show interface description output into interface-description blocks for FS5800 / FS3900.

03◫

IPAM Cleaner

Load five-column IPAM exports, apply local rules or a secure Gemini review, then export clean CSV.

✓

Your approved corrections win.

Local rules run privately. Gemini review is optional, sends only the active table through the secured Worker, and cannot change IP addresses, ports, interfaces, or FS status.

EXOS / SWITCH ENGINE

Extreme Switch port labels

Paste a show ports description table, edit labels, and create copy-ready configuration commands.

Switch / site name Other name / peer ID Switch role

1. Paste raw port table

Supports EXOS spacing, CSV, TSV, or pipe-separated data.

INPUT

Safe formatting assists

Only low-risk transformations are applied.

OPTIONAL

Normalize CEP-To_… to CEP_To_… Normalize To-CTL-DPLC-ethN to Control-DPLC-ethN Use lowercase eth and write explicit backbone speeds as (10G) / (40G) Keep all Available pairs consistent Normalize R1D/R2D descriptions to the selected L2/L3 switch role Use semantic workbook matches for BTC, LBE5AC, DIA/BI, and Fiber peer labels

Local reference: the supplied DR22-MNDA before → after profile and supplied AI-correction profile change only exact approved port + source pairs. A recognized multi-row fingerprint also activates the supplied one-pass final command profile, including COPI-VXLAN-SPSY:eth2, after one review. Semantic workbook guidance: Gemini and the checked local rule use identifying tokens, not whole-string equality: explicit BTC numbers become BTCnn-MGMT; LBE5AC + an order ID becomes L2-BI-<order>; explicit DIA stays DIA rather than BI; Fiber-DIA-<peer> becomes Fiber-<peer>. Gemini R1F guidance: NATA is IE; NATX, METX, and MYRX are FSE. Gemini review all ports: evaluates incomplete and Ready rows alike, but it can never change the port number or invent uncertain labels.

Port	Display String	Description String	Validation

Paste a raw port table or load the DR23 example to begin.

DEPLOYMENT OUTPUT

3. Extreme configuration

Uses configure ports <port> display-string and description-string.

# Port configuration will appear here.

FS5800 / FS3900

FS Switch interface descriptions

Convert interface output into interface-mode description configuration blocks.

FS switch hostname Local DR name

1. Paste interface output

Works with show interface description output.

INPUT

FS formatting assists

Based on approved FS description references.

OPTIONAL

To-R1F-… → L3-R1F-… R1F-… links → L3-Fiber-FSE-… Normalize DR data links to L3-DR<id>:P<port> Generate Available for down interfaces

Approved FS pattern: direct R1F links stay L3-R1F-…:ethN; FSE links use L3-Fiber-FSE-…:ethN. Every Ethernet token uses lowercase eth.

Interface	Status	Description	Validation

Paste FS interface output or load the FS5800 example to begin.

DEPLOYMENT OUTPUT

3. FS configuration

Creates CLI blocks for configure terminal → interface → description.

# Interface configuration will appear here.

IP ADDRESS MANAGEMENT

IPAM naming cleaner

Load a five-column export, apply the approved naming conventions, and export CSV for review or import.

Default site code Switch / device name Default domain

1. Paste or import records

The parser finds a valid IPv4 address in any column, then maps Description, Hostname, Device, and Port automatically.

AUTO

Import CSV / TSV / saved HTMLNo file selected

About the supplied reference sheet: it contains naming templates, not IP addresses. It is already built into the local rules; import an IPAM export with IPv4 addresses to apply those rules. Download reference CSV

Approved cleanups

Safe transformations from your reference corrections.

OPTIONAL

Control DPLC at/of SITE → Control-DPLC-SITE W-CPE Mgmt… → Mgmt IP of <hostname> Remove unapproved (PTP-DIA) text Add .frontiir.net to known Frontiir hostnames Apply safe hostname templates from the supplied IPAM reference sheet

Switch / device name: the editable box above gives Gemini local switch context only; it never overwrites a record by itself. Gemini review can suggest improvements, but it cannot change an IP address.

IP address	Description	Hostname	Device	Port	Validation

Paste five-column data, import a CSV, or load the MNDA sample to begin.

CLEAN FORMAT

IPAM saved-page table

A presentation-ready five-column table. Export it as a self-contained HTML page, then upload or reopen it later.

IP Address	Description	Hostname	Device	Port

Your approved IPAM records will appear here.

EXPORT OUTPUT

3. Clean IPAM CSV

Exports exactly: IP address, Description, Hostname, Device, Port.

# CSV preview will appear here.

REFERENCE LIBRARY

Approved naming standards

These references power the conservative formatting assistance in the portal.

IPAM reference CSV Switch format CSV Approved port tables CSV Approved FS5800 CSV DR22-MNDA before → after CSV Exact AI correction CSV One-pass final commands CSV Gemini policy

Extreme

Port descriptions

Available for unused ports
Control-DPLC-ethN for Control DPLC ports
L2-SEC-<degree>D for sectors
L2-BI-<customer> for BI wireless links
Every eth token is lowercase; Juniper et-… is unchanged
Explicit backbone rates use (10G) / (40G) notation
R1D/R2D… links use the device role’s L2/L3 prefix
Exact DR22-MNDA and supplied AI source pairs use their approved before → after profiles only
Gemini guidance: NATA is IE; NATX, METX, and MYRX are FSE
Recognized supplied batch: one-pass final commands include COPI-VXLAN-SPSY

FS Switch

Interface descriptions

Direct R1F: L3-R1F-<host>:ethN
FSE fiber: L3-Fiber-FSE-<host>:ethN
DR data port: L3-DR<id>:P<port>
Configure only connected/approved interfaces

IPAM

CSV-controlled record style

Device FQDN + device description, for example FS5800-SW01-KAKC-YGN.frontiir.net
Link descriptions use the supplied direction: Fiber From <local> to <peer>
ESW01 at MNDA and Control-DPLC-MNDA follow your approved corrections
No unapproved (PTP-DIA) suffixes
The included IPAM CSV is a rule sheet; import a data export with IPv4 addresses to format records

Examples from the current standard

Edit your data in the working tabs; the examples below are read-only reminders.

Reference

ESW record172.16.120.20 | ESW01 at MNDA | ESW01-MNDA-YGN.frontiir.net

Control DPLCControl-DPLC-MNDA | ER-Control-DPLC-MNDA-YGN.frontiir.net

Management IPMgmt IP of ER-DIA01-KSNW-MNDA-MEMD-YGN

R1W → V1PTo_V1P-MNDA01ZMEY:eth2 | Industrial PC | eth2

Fiber endpointFiber From DR22-MNDA to DR78-PRIM

V1P COPICOPI-VXLAN at DR22-MNDA

LOCAL NOTE

Add a naming reminder

This note is stored only in this browser for the team using this portal.

Turn raw inventory into consistent naming.

Choose your starting point

Extreme Switch

FS Switch

IPAM Cleaner

Extreme Switch port labels

1. Paste raw port table

Safe formatting assists

2. Review port records 0

3. Extreme configuration

FS Switch interface descriptions

1. Paste interface output

FS formatting assists

2. Review interfaces 0

3. FS configuration

IPAM naming cleaner

1. Paste or import records

Approved cleanups

2. Review IPAM records 0

IPAM saved-page table

3. Clean IPAM CSV

Approved naming standards

Port descriptions

Interface descriptions

CSV-controlled record style

Examples from the current standard

Add a naming reminder